FURITEK TRI-UNITY30 FULLRANGE DRIVE TORQUE – High-Torque FOC Drivetrain for SCX30

SKU: FUR-2876

$139.99

Brand: Furitek

Availability: In Stock

FURITEK · FUR-2876 · BUILT FOR AXIAL SCX30 TRI-UNITY30FULLRANGE DRIVE™ TORQUE High-Torque FOC Drivetrain for SCX30 More Pull Down Low. Still Full Range. The TORQUE version of TRI-UNITY30 is tuned for pulling power. Run it on 2S or 3S for strong, smooth traction at crawling speed, then open the throttle...

🚚 Ships in 1–2 business days · UPS Express 3–5 days
🛡️ 90-day replacement on defective items
💬 Questions? sales@furitek.com

Import duties/taxes, if any, are paid by the buyer. UPS cannot deliver to a PO Box. Shipping policy

FURITEK · FUR-2876 · BUILT FOR AXIAL SCX30

TRI-UNITY30
FULLRANGE DRIVE™ TORQUE

High-Torque FOC Drivetrain for SCX30

More Pull Down Low. Still Full Range.

The TORQUE version of TRI-UNITY30 is tuned for pulling power. Run it on 2S or 3S for strong, smooth traction at crawling speed, then open the throttle for up to 3× the top speed of a stock SCX30. One integrated motor, transmission and FOC ESC, mounted low in your chassis.

$139.99 USD

Brushless motor + transmission + FOC ESC
Built-in WiFi included · FUR-2843 skid sold separately, or choose FUR-2877 with Alu Skid

IMPORTANT / SKID REQUIRED

Not compatible with the stock SCX30 skid.

This version does not include a skid plate. TRI-UNITY30 TORQUE cannot be installed or used with the stock Axial SCX30 skid.

You must purchase the FUR-2843: FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30 separately. Or choose the FUR-2877: TRI-UNITY30 FULLRANGE DRIVE™ TORQUE with Alu Skid, which includes the required aluminum skid.

High Torque

Strong pull at low speed

2S–3S Ready

Full support on both

3× Stock Speed

Up to 3× stock SCX30 top speed

Smooth & Quiet

FOC control, geared drive

Built to pull. Ready to run.

The FURITEK TRI-UNITY30 FULLRANGE DRIVE™ TORQUE uses the same integrated architecture as the standard TRI-UNITY30: a brushless motor, conventional geared transmission and advanced Furitek FOC ESC in one ultra-compact assembly. The difference is the tune. TORQUE puts more of the drivetrain's range into pulling power at low speed.

On 2S or 3S, the TORQUE version digs in on steep climbs, holds a steady crawl up ledges and keeps pulling when the tires are loaded. Top speed is slightly lower than the standard TRI-UNITY30, but it is still a true FULLRANGE DRIVE™ system, reaching up to 3× the top speed of a stock SCX30 when the trail opens up.

FOC control and the geared center transmission keep it all smooth and quiet, from the first millimeter of throttle to full speed.

More Pull Down Low. Still Full Range.

Key Features

01 / HIGH TORQUE

Strong traction at crawl speed.

The TORQUE tune focuses on low-speed pulling power. It climbs steep faces and loaded ledges with steady, controlled force instead of bogging down or lurching forward.

02 / 2S–3S SUPPORT

Run the battery you want.

Fully supports 2S and 3S LiPo. Both deliver strong low-speed pull. Choose 2S for a lighter build or 3S for extra punch and more wheel speed.

03 / FULLRANGE DRIVE™

Up to 3× stock SCX30 speed.

A torque tune does not mean a slow truck. TORQUE still covers the full range, from ultra-slow crawling to up to 3× the top speed of a stock SCX30.

04 / SMOOTH OPERATION

Quiet, natural throttle feel.

Furitek FOC control and the conventional geared transmission deliver smooth, quiet operation and a natural response across the whole throttle range.

05 / LOW AND COMPACT

Bring the drivetrain mass down.

The motor, transmission and ESC form one ultra-compact assembly mounted low in the chassis. The motor and ESC sit on the same side, so you can orient the unit for front or rear weight bias.

06 / WIRELESS SETUP

Make it drive your way.

A built-in WiFi module connects to the FuriCar App for supported ESC adjustments. Tune for your terrain and driving style without a separate programming module.

TORQUE or Standard?

TRI-UNITY30 TORQUE: more pulling power at low speed, with a slightly lower top speed. Best for technical crawling, steep climbs and heavier builds.
TRI-UNITY30 Standard: higher top speed. Best for drivers who want more momentum and wheel speed on the trail.

Both are full-range FOC drivetrains with the same integrated design, 2S–3S support and FuriCar App tuning.

FURITEK TRI-UNITY30 FULLRANGE DRIVE TORQUE high-torque FOC drivetrain for Axial SCX30

Why TRI-UNITY30 Is Different

In the traditional SCX30 center worm-based layout, mechanical reduction plays a major role in producing slow crawling speeds. Changing the motor and ESC alone leaves that central transmission architecture in place.

TRI-UNITY30 redesigns the transmission and its control system together. Conventional gears handle power transfer to the axles, while Furitek FOC handles precise low-speed motor control. This gives the drivetrain greater freedom to deliver wheel speed without relying on extreme center reduction for crawling control.

The change is specifically in the center drivetrain. It does not describe a replacement of the axle internals.

TRI-UNITY30 FULLRANGE DRIVE installed in an SCX30 crawler, showing the low-mounted integrated drivetrain. — **Mounted low. Built for better balance.**
With TRI-UNITY30 installed, the integrated motor, transmission and ESC sit much lower in the chassis, significantly reducing the vehicle's center of gravity compared with the stock SCX30 transmission layout.

Furitek FOC: Smooth Power at Any Speed

FOC, or Field-Oriented Control, manages the brushless motor's torque-producing current for smooth, precise and quiet operation. In TRI-UNITY30 TORQUE, it lets the drivetrain deliver strong, steady pull at very low speed without jerky starts.

The transmission provides mechanical reduction and torque multiplication. FOC adds the fine control needed to use that torque at a crawl, while keeping the full speed range available as throttle input increases.

Ultra-Low CG and Selectable Weight Bias

With the ESC integrated into the transmission package, electronics mass moves down into the drivetrain area. There is no need to find a separate ESC mounting position higher in the chassis, and the truck stays composed on steep climbs, side slopes and uneven obstacles.

The motor and ESC sit on the same side of the assembly. Orient the drivetrain to place their mass toward the front to keep the front axle loaded on climbs, or toward the rear to balance around battery placement and your driving style.

Need the skid too? Choose the complete package.

This version is priced at $139.99 without a skid. Choose FUR-2877: TRI-UNITY30 FULLRANGE DRIVE™ TORQUE with Alu Skid at $149.99 to get the same TORQUE drivetrain with the required aluminum skid included. Both versions use the same drivetrain. Neither version uses the stock SCX30 skid.

What's Included

1 × FURITEK TRI-UNITY30 FULLRANGE DRIVE™ TORQUE assembly
Integrated brushless motor, conventional geared transmission and Furitek FOC ESC.
Built-in WiFi module
Integrated into the assembly for FuriCar App tuning, not a separate accessory.
1 × User Manual

Skid plate not included. Purchase the FUR-2843: FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30 separately or choose the FUR-2877 with Alu Skid version.

Required Equipment

FUR-2843: FURITEK Aluminum Skid Plate for TRI-UNITY30 SCX30, sold separately, or choose the FUR-2877 with Alu Skid version. The stock Axial SCX30 skid cannot be used.
Compatible transmitter and receiver system. See the recommended options below.
2S or 3S LiPo battery with a 2-pin JST-PH 2.0 connector or suitable power adapter.
Mobile device with the FuriCar App for wireless tuning.

Recommended for ages 14+. Hobby-grade RC product, not a toy.

Compatibility and Installation

Important Frame Fitment Notice

When installing TRI-UNITY30 TORQUE in the stock Axial SCX30 frame, minor trimming of the center frame area is required to provide proper clearance.

For a direct installation without frame trimming, use the FUR-2783 - FURITEK MANTIS LCG Competition Chassis Kit for SCX30, available separately.

Compatibility with third-party and aftermarket frames has not yet been verified. Please review your chassis layout, dimensions and installation requirements before purchasing. Additional modifications may be required depending on the frame.

Target platform: Axial SCX30, 1/30 scale.
FUR-2876 (this version): Skid not included. The stock Axial SCX30 skid is not compatible. Purchase the FUR-2843 Aluminum Skid Plate separately.
FUR-2877 with Alu Skid: Same TORQUE drivetrain with the FUR-2843 Aluminum Skid Plate included.
Orientation: Front-facing or rear-facing installation depends on skid mounting, chassis clearance and driveshaft fitment.
Power: 2S or 3S LiPo with a 2-pin JST-PH 2.0 battery connector.

Technical Specifications

Product Code / SKU	FUR-2876
Version	TORQUE (high-torque tune)
Platform	Axial SCX30, 1/30 scale
System	Integrated brushless motor, transmission and FOC ESC
Center transmission	Conventional geared architecture
Motor control	Furitek FOC with FULLRANGE DRIVE™
Top speed	Up to 3× stock SCX30 (slightly lower than TRI-UNITY30 Standard)
Battery Support	2S–3S LiPo
BEC output voltage / current	5.5V / 7.4V selectable, 5A
Wireless tuning	Built-in WiFi module with FuriCar App
Housing material	CNC-machined aluminum
Power connector	2-pin JST-PH 2.0 (same type as stock SCX30 and SCX24 battery connectors)
Skid plate	Not included. FUR-2843 required, sold separately (included in FUR-2877 with Alu Skid)

Recommended Transmitter & Receiver Options

Choose a complete transmitter and receiver combo, or select a receiver to match the transmitter you already own. The following radio products are sold separately.

Buying a New TX/RX System?

We recommend either of these Furitek transmitter and receiver combos for your build:

FURITEK GRIPOR V2 4CH TX/RX System
A compact 4-channel transmitter and receiver system for micro and mini RC builds.
Furitek MicroFlex PRO 4WS TX/RX Combo
A transmitter and receiver combo for drivers who want four-wheel steering control for their crawler build.

Keeping Your Stock SCX30 Transmitter?

Pair your stock Axial SCX30 SLT2 transmitter with the Furitek Micro SLT2 Receiver. This receiver is for use with compatible Furitek ESCs only and requires a one-time bind to your transmitter. Transmitter sold separately.

Already Using a Flysky FS-GT5?

Choose the Furitek Nano GT5 Receiver for your Flysky FS-GT5 transmitter. This compact 4-channel receiver is designed for SCX24 and SCX30 builds, works with all Furitek ESC systems, and requires a one-time bind. Flysky FS-GT5 transmitter sold separately.

Compare FURITEK SCX30 Brushless Systems

Choose the system that fits your driving style, power requirements and installation space.

Prices are MSRP in USD. Scroll horizontally to view the full comparison on smaller screens.

Series	MSRP	Motor	Battery Support	BEC	Best For & Key Benefits	Recommended Scale/Application
NANO CORE 30	$74.99	VENOM30 1212	2S only	5V / 3A	An affordable first brushless crawler upgrade with simple setup and full app tuning.	1:30 scale SCX30 and compatible ultra-micro crawlers (Entry-level crawling)
NANO CORE 30 SPEED	$84.99	VENOM30 1212 SPEED	2S only	5V / 3A	An affordable first brushless upgrade for more wheel speed, with full app tuning.	1:30 scale SCX30 and compatible ultra-micro RC builds (Entry-level higher-speed driving)
NanoModo	$99.99	Nano Komodo 1205	2S to 3S	5.5V / 7.4V selectable 5A	Advanced crawling with a smaller, lighter motor, smoother control, aluminum ESC housing, and a stronger selectable BEC.	1:30 scale SCX30 and compatible custom micro crawlers (Advanced crawling performance)
NanoModo SPEED	$119.99	Nano Komodo SPEED	2S to 3S	5.5V / 7.4V selectable 5A	Advanced speed builds with a compact motor, smooth control, aluminum ESC housing, and a stronger selectable BEC.	1:30 scale SCX30 and compatible custom micro RC builds (Advanced higher-speed performance)
NANO UNITY TORQUE	$99.99	Integrated Motor + ESC	2S to 3S	5.5V / 5A	Compact crawler builds focused on torque, with an integrated motor and ESC to save space and reduce wiring.	1:30 scale SCX30 and compatible custom micro crawlers (Advanced compact builds focused on torque)
NANO UNITY SPEED	$119.99	Integrated High-Speed Motor + ESC	2S only	5.5V / 5A	Compact builds focused on speed, with an integrated motor and ESC to save space and reduce wiring.	1:30 scale SCX30 and compatible custom micro RC builds (Advanced compact builds focused on speed)
TRI-UNITY30 FULLRANGE DRIVE™	$139.99 $149.99 with Alu Skid	Integrated Motor + Transmission + ESC	2S–3S LiPo	5.5V / 7.4V selectable 5A	Integrated motor, transmission and FOC ESC. Widest speed range with the highest top speed, low CG and selectable weight bias.	1:30 scale Axial SCX30 (Full range, speed focused)
TRI-UNITY30 FULLRANGE DRIVE™ TORQUE	$139.99	Integrated Motor + Transmission + ESC (high-torque tune)	2S–3S LiPo	5.5V / 7.4V selectable 5A	Strong low-speed pull on 2S or 3S, up to 3× stock SCX30 top speed, smooth and quiet FOC operation. FUR-2843 skid required, sold separately.	1:30 scale Axial SCX30 (Full range, torque focused)
TRI-UNITY30 FULLRANGE DRIVE™ TORQUE with Alu Skid	$149.99	Integrated Motor + Transmission + ESC (high-torque tune)	2S–3S LiPo	5.5V / 7.4V selectable 5A	Same TRI-UNITY30 TORQUE drivetrain with the required aluminum skid included (FUR-2877).	1:30 scale Axial SCX30 (Full range, torque focused)

NANO CORE 30 Series: An Easy Start in Brushless

Choose CORE for value and simple setup. Both versions use the VENOM30 1212 motor platform, a plastic ESC housing, full FuriCar App support, 2S-only operation, and a 5V / 3A BEC.

NanoModo Series: Advanced Performance

Choose NanoModo for a smaller, lighter motor platform, smoother and more precise control, and a CNC aluminum ESC housing, with 2S to 3S support and a 5A BEC with selectable 5.5V or 7.4V output.

NANO UNITY Series: Compact 2-in-1 Integration

Choose NANO UNITY to integrate the ESC and motor into one compact unit, reduce wiring, and free up chassis space. TORQUE prioritizes crawling torque; SPEED prioritizes wheel speed.

TRI-UNITY30 Series: 3-in-1 FULLRANGE DRIVE™

Choose TRI-UNITY30 to replace the stock center transmission with an integrated motor, geared transmission and FOC ESC. The Standard version gives the highest top speed. The TORQUE version puts more power into low-speed pulling while keeping the full range.

More Pull Down Low. Still Full Range.

FUR-2876 TRI-UNITY30 FULLRANGE DRIVE™ TORQUE. Strong traction on 2S or 3S, up to 3× stock SCX30 top speed, smooth FOC control and a dramatically lower center of gravity.

FUR-2843 skid sold separately, or choose FUR-2877 with Alu Skid. Stock SCX30 skid is not compatible.