Built for Drivers Who Choose Their Own Setup.

The FURITEK KRAWL 30 FULLRANGE COMP Assembled Builder Kit gives experienced builders a prepared competition platform with the freedom to choose the components that define its handling. The TRI-UNITY30 drivetrain, axles, and lightweight titanium frame form the assembled foundation.

Keep the transmitter you already know, match a receiver to it, select a servo for your steering requirements, and tune wheel weight and tire grip for your terrain. Finish the clear body in your own colors or fit another compatible body.

TRI-UNITY30: Ultra Slow to High Wheel Speed.

FULLRANGE DRIVE™ combines the conventional geared center transmission with Furitek Field-Oriented Control. FOC provides precise brushless motor control at very low speeds, while the transmission allows a much wider usable speed range than the traditional SCX30 center worm-based approach.

Ease a tire onto a ledge, feed in throttle through a technical section, then call on higher wheel speed when an obstacle needs momentum. Smooth transitions give the 1/30 platform a natural driving feel.

The brushless motor, transmission, and FOC ESC are already included in the TRI-UNITY30 assembly. Built-in WiFi gives you access to supported setup and tuning functions through the FuriCar App.

Low Center of Gravity. Balance Tuned by You.

The compact TRI-UNITY30 assembly sits low in the titanium chassis. The motor and ESC are on the same side of the drivetrain, allowing their mass to be biased toward the front or rear through an orientation supported by the chassis setup.

Wide aluminum axles and brass front steering knuckle weights provide the KRAWL 30 platform’s stable foundation. Your choice of wheels, tires, battery position, and body then determines the final balance of the completed vehicle.

21° Skid, Wide Axles, and Controlled Suspension.

The 21° angled skid and high-clearance links help the chassis clear ledges. Aluminum front and rear axles are +4 mm wider than stock SCX30, while 25 mm aluminum oil-filled shocks provide controlled suspension movement.

Front and rear steel driveshafts transfer power to the axles. High-angle front U-joint/CVD shafts support up to approximately 45° steering; the usable steering angle depends on your servo, horn, endpoint settings, and wheel clearance.

Clear Body. Your Colors. Your Build.

The included clear, unpainted competition body lets you create your own finish. The aluminum modular mounting system supports the competition body and direct mounting of a stock SCX30 hardbody.

Other bodies can be used where their dimensions and mounting arrangement suit the chassis. Check clearance throughout steering and suspension travel. Additional bodies, paint, and finishing materials are not included.

Technical Specifications

Recommended Transmitter & Receiver Options

Choose a complete transmitter and receiver combo, or select a receiver to match the transmitter you already own. The following radio products are sold separately from the KRAWL 30 Assembled Builder Kit.

Complete and Tune Your Platform.

Install your selected wheels, tires, servo, and radio system, then set steering endpoints and check full suspension travel. Select a BEC voltage supported by both your servo and receiver before powering the completed system.

Fit a charged compatible battery and configure the ESC through the FuriCar App. Tune the platform around your components, terrain, and driving style.

Replacement & Spare Parts

Replacement parts for maintaining your KRAWL 30 Assembled Builder Kit. Sold separately.