FURITEK · FUR-2880 · AXIAL SCX30 JEEP CJ-7 MANTIS LCGCOMPETITION CHASSIS KIT Built for the Axial SCX30 Jeep CJ-7 The SCX30 Jeep CJ-7 rides on a shorter wheelbase than the other SCX30 models, so the standard MANTIS chassis kits do not fit it. FUR-2880 is the MANTIS LCG made specifically...
Import duties/taxes, if any, are paid by the buyer. UPS cannot deliver to a PO Box. Shipping policy
FURITEK · FUR-2880 · AXIAL SCX30 JEEP CJ-7
Built for the Axial SCX30 Jeep CJ-7
The SCX30 Jeep CJ-7 rides on a shorter wheelbase than the other SCX30 models, so the standard MANTIS chassis kits do not fit it. FUR-2880 is the MANTIS LCG made specifically for the CJ-7: a 15° angled skid, plenty of shock mounting options and light 1 mm titanium rails, sized for short-wheelbase builds like the CJ-7.
Light, compact and clean-looking. Drop your CJ-7 onto a real competition chassis.
CJ-7 Specific
Sized to the CJ-7's short wheelbase
15° Angled Skid
Slides over ledges instead of hanging up
Lots of Shock Options
Multi-hole aluminum mounts, front and rear
Light & Compact
1 mm titanium rails, low upper weight
Fitment: made for short-wheelbase SCX30 kits such as the Axial SCX30 Jeep CJ-7. Other MANTIS kits do not fit these short chassis, and this kit does not fit the standard-wheelbase SCX30 models. For those, choose the standard MANTIS LCG (FUR-2783).
01 / CJ-7 WHEELBASE
The CJ-7 rides on a shorter wheelbase than the other SCX30 trucks, and that short wheelbase is a big part of its look. A chassis built for the longer SCX30 trucks will not line up with it. This MANTIS keeps the CJ-7 proportions and body fit, while replacing the stock frame with a low, light competition layout.

02 / 15° ANGLED SKID
The 15° angled skid geometry improves breakover, so the chassis slides up and over ledges and steep transitions instead of catching on them. Combined with the low center of gravity of the MANTIS LCG layout, the CJ-7 stays planted on climbs, side hills and technical lines.
03 / SHOCK OPTIONS
The aluminum shock mounts, front and rear, are drilled with a wide range of mounting holes. Lay the shocks down or stand them up, move them inboard or outboard, and find the setup that lets the axles droop and stuff freely.

04 / LIGHT, COMPACT, GOOD-LOOKING
1 mm titanium rails and aluminum mounts keep the chassis light and the upper weight low. The open layout looks clean under the body and leaves room to place electronics and battery where you want them.

RECOMMENDED SETUP
For the MANTIS CJ-7 we recommend a NANO UNITY 2-in-1 FOC ESC & motor with the Micro SLT2 receiver. The Micro SLT2 binds to the stock Axial SLT2 transmitter that came with your CJ-7, so you upgrade to brushless FOC power and keep driving with the radio you already have.
CRAWL CONTROL
Torque-focused 2-in-1 FOC ESC & motor for smooth, controlled crawling.
MORE WHEEL SPEED
Speed-focused 2-in-1 FOC ESC & motor for more wheel speed on demand.
KEEP YOUR STOCK TX
Works with the stock Axial SLT2 transmitter. Compatible with Furitek ESCs only.
Prefer a new radio instead? NANO UNITY also comes with the GRIPOR V2 TX/RX: FUR-2760 TORQUE or FUR-2761 SPEED.
Demonstration build. Axles, wheels, tires, electronics and battery are not included.
Recommended for ages 14+. Hobby-grade RC product, not a toy.


| Part number | FUR-2880 |
|---|---|
| Series | FURITEK MANTIS LCG |
| Fits | Short-wheelbase Axial SCX30 kits such as the Jeep CJ-7 |
| Scale | 1/30 |
| Chassis rails | 1 mm titanium |
| Skid angle | 15° |
| Shock mounts | Aluminum, front and rear, multiple mounting positions |
| Body mounting | Magnetic or traditional post mounting |
| Rock sliders | Included |
FUR-2781: Aluminium Oil Shock 25mm
Oil-filled aluminum shocks to make the most of the extra shock positions.
FUR-2870: Battery Mounting Pads
Hook & loop pads to secure the battery on the MANTIS.
FUR-2777: PITBOX Micro Tool Kit
Compact tools for assembly and shock repositioning.
FUR-2880 gives the Axial SCX30 Jeep CJ-7 the MANTIS LCG treatment: a 15° angled skid, plenty of shock options and a light, compact 1 mm titanium frame. Add NANO UNITY and the Micro SLT2 and keep your stock transmitter.
