Best Brushless Upgrade for the Axial SCX30 Jeep CJ-7: NANO UNITY, Micro SLT2 & MANTIS CJ-7 Chassis

BUYING GUIDE · AXIAL SCX30 JEEP CJ-7

Short wheelbase. Tight body.
Pick the upgrade that fits.

The CJ-7 is the shortest SCX30 and its body hugs the chassis. That changes which brushless system makes sense. Here is what we recommend, why, and exactly what to buy.

THE SHORT ANSWER

Furitek NANO UNITY TORQUE 2-in-1 FOC ESC and motor

1 · POWER

NANO UNITY TORQUE / SPEED

2-in-1 FOC ESC + motor. Bolts onto the stock transmission. No body cutting.

From $99.99 →
Furitek Micro SLT2 Receiver for the stock Axial SLT2 transmitter

2 · RADIO

Micro SLT2 Receiver

Keep driving with the stock SLT2 transmitter that came with your CJ-7.

$15 with NANO UNITY →
Furitek MANTIS LCG chassis kit for the Axial SCX30 Jeep CJ-7

3 · CHASSIS (OPTIONAL)

MANTIS LCG for CJ-7

Titanium comp chassis made for the CJ-7's short wheelbase.

$39.99 →

01 / WHY THE CJ-7 IS DIFFERENT

Less room than any other SCX30

Most SCX30 upgrade advice assumes the longer, standard-wheelbase trucks. The CJ-7 is shorter and its body sits close to the chassis, so:

Little spare space

Nothing taller or wider than stock fits easily under the body.

Body clearance

Bigger drivetrain parts tend to hit the body.

Different wheelbase

Chassis parts for longer SCX30s won't line up.

So on the CJ-7, the best upgrade adds performance without taking up extra space.

02 / NANO UNITY VS TRI-UNITY30

Why NANO UNITY is the better fit

TRI-UNITY30 is our most advanced SCX30 drivetrain and it is excellent on the longer trucks. On the CJ-7 it is a tight squeeze: you have to trim the body, and on the stock frame the center plastic too.

RECOMMENDED FOR CJ-7

NANO UNITY

  • 2-in-1 ESC + motor, almost no wiring
  • Direct bolt-on to the stock transmission
  • No body cutting
  • FOC smoothness + FuriCar app tuning

POSSIBLE, WITH CUTTING

TRI-UNITY30

  • Replaces the whole center transmission
  • Widest crawl-to-speed range
  • Body must be trimmed on the CJ-7
  • See the CJ-7 install video
Furitek NANO UNITY 2-in-1 FOC ESC and motor installed on the Axial SCX30 transmission

03 / TORQUE OR SPEED

Pick your NANO UNITY

NANO UNITY TORQUE NANO UNITY SPEED
Best for Technical crawling, slow climbs and descents Trail driving, more wheel speed
Speed Torque-first tune for low-speed control Over 1.5x stock on 2S
Battery 2S or 3S LiPo 2S LiPo only
BEC 5.5V / 5A 5.5V / 5A
Install Direct bolt-on to the stock SCX30 transmission
Price $99.99 $119.99
Our pick for most CJ-7 owners: TORQUE. The short wheelbase makes the CJ-7 a natural rock crawler, and TORQUE gives the smoothest low-speed control. Choose SPEED if you spend more time on trails than on rocks.

04 / KEEP YOUR STOCK TRANSMITTER

Micro SLT2 Receiver

The CJ-7's stock receiver is built into the stock ESC board, which comes out when you fit NANO UNITY. The Micro SLT2 lets you keep the SLT2 transmitter you already have.

  • Works with the stock Spektrum SLT2 transmitter
  • One-time bind, no programming
  • Tiny footprint for the tight CJ-7 body
  • Furitek ESCs only

Bundle offer: $15 instead of $29.99 with any NANO UNITY. Applied automatically at checkout.

View Micro SLT2 →
Furitek Micro SLT2 Receiver

Prefer a new radio? NANO UNITY also comes as a Control System with the GRIPOR V2 TX/RX: TORQUE or SPEED.

05 / GO FURTHER

MANTIS LCG: a comp chassis made for the CJ-7

Our standard MANTIS doesn't fit the CJ-7's short wheelbase, so we built one that does. FUR-2880 replaces the stock frame with a low, light competition layout and keeps the CJ-7 body fit.

MANTIS CJ-7 chassis built up as a rolling chassis

Demonstration build. Axles, wheels, tires, electronics and battery not included.

CJ-7 specific

Sized to the short wheelbase

15° angled skid

Slides over ledges instead of hanging up

Shock options

Multi-hole aluminum mounts

1 mm titanium

Light, low upper weight

MANTIS CJ-7 short-wheelbase titanium rails and shock mounts
MANTIS CJ-7 aluminum shock mounts with multiple holes

Not for the standard-wheelbase SCX30 trucks. For those, use the standard MANTIS LCG.

06 / BUILD LISTS

Two ways to build your CJ-7

BUILD A · NO CUTTING

Stock-frame brushless

From $114.99

BUILD B · FULL COMP

MANTIS CJ-7 comp build

From $154.98

FAQ

Common questions

Can I still put TRI-UNITY30 in my CJ-7?

Yes, but you'll need to trim the body, and on the stock frame the center plastic too. Follow the CJ-7 install video. To keep the body intact, choose NANO UNITY.

Do I need to replace the transmission for NANO UNITY?

No. NANO UNITY bolts directly onto the stock SCX30 transmission.

Will the Micro SLT2 work with my transmitter?

It works with the genuine Axial/Spektrum SLT2 transmitter that comes with the SCX30 CJ-7. Transmitter not included.

Does the MANTIS CJ-7 kit fit other SCX30 trucks?

No. FUR-2880 is sized for the short-wheelbase CJ-7. Use the standard MANTIS LCG for the others.

Ready to go brushless?

Compare every SCX30 option or browse the full range.

SCX30 comparison guide Shop Axial SCX30

Questions? sales@furitek.com